Terrier

Standard clamps equipped with an extra hardened pivot and cam for Hardox lifting and transporting steel plates with a hardnes of max. 50 HRC. (for Hardox 400 and 500). Can be delivered as TS, TSU, TSE, TSEU, and TS(E)MP models. Please ask for special specifications. Other capacity and jaw-opening on request.

Features:

  • Equipped with an extra hardened pivot and cam.
  • Cam is coloured green for easy identification.
  • Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered.
  • Clamp is locked in closed as well as open position.
  • Lightweight design for easy handling.
  • Tough quality heavy duty welded shell body.
  • Maintenance-friendly, easy to exchange parts which are available upon request.

 

  • Marking: According to standard, CE-marked, Type, serial number, WLL, Jaw opening.
  • Temperature range: - 40°C to +100°C.
  • Standard: EN 13155
  • Note: Hardness level of the material surface may not exceed 50 HRC.
  • Warning: Min. load is 10% of WLL.
    TS-H/TSMP-H/TSU-H [new]
    Select a row from the table below, then click the add to quote button
    Part Code Code WLL
    ton
    Jaw width
    mm
    S
    mm
    T
    mm
    U
    mm
    V
    mm
    W
    mm
    X
    mm
    Y
    mm
    Weight
    kg
    16.01850000.5 0.75 TS-H 0,75 0-13 47 30 202 100 37 37 10 1,7
    16.01855000.5 0.75 TSU-H 0,75 0-13 47 30 203 100 37 37 10 1,8
    16.01850010.5 0.75 TSMP-H 0,75 0-13 47 30 307 100 37 37 10 2
    16.01865800.5 1 TSEU-H 1 0-25 56 50 292 141 37 47 15 3,5
    16.01850880.5 1 TSE-H 1 0-25 56 45 263 141 37 47 15 3,5
    16.01850818.5 1 TSEMP-H 1 0-25 56 45 403 141 37 47 15 4,5
    16.01850901.5 2 TSE-H 2 0-35 78 64 336 183 56 56 16 7
    16.01855601.5 2 TSEU-H 2 0-35 78 70 372 183 56 56 16 8
    16.01850911.5 2 TSEMP-H 2 0-35 78 64 516 183 56 56 16 8
    16.01850331.5 3 TSE-H 3 0-35 78 64 336 183 56 56 16 7
    16.01865331.5 3 TSEU-H 3 0-35 78 70 372 183 56 16 8 8
    16.01850451.5 4.5 TSE-H 4,5 0-45 85 70 425 228 60 78 16 16
    16.01865301.5 4.5 TSEU-H 4,5 0-45 85 70 431 228 60 78 20 16,5
    16.01851401.5 4.5 TSEMP-H 4,5 0-45 85 70 650 228 60 78 20 19
    16.01851411.5 6 TSE-H 6 0-50 114 75 490 259 82 78 20 21
    16.01850311.5 6 TSMP-H 6 0-32 114 75 760 225 78 78 20 24
    16.01865411.5 6 TSU-H 6 0-50 114 78 527 259 82 78 32 24
    16.01851501.5 7.5 TSE-H 7,5 0-55 111 75 522 267 70 86 20 26
    16.01855400.5 7.5 TSEU-H 7,5 0-55 111 78 560 259 70 86 32 28
    16.01851510.5 7.5 TSEMP-H 7,5 0-55 111 75 792 267 70 86 20 30,5